ELECTRICAL ENGINEERING PROJECT TOPICS AND MATERIALS IN NIGERIA | RESEARCH PROJECT TOPICS AND PROJECT TOPICS ON EDUCATION

1. DESIGN AND CONSTRUCTION OF AN AC/SOLAR RECHARGEABLE LANTERN

» CHAPTER ONE INTRODUCTION 1.1 Background to the Study Over the years the use of fossil fuels to generate electricity has not produced enviable results. Besides, fossil fuels have caused a lot of havoc to the ecosystem with Africa not being able to tap into the advantages of using fossil fuels to generate electricity. Therefore, the need for an alternative source of generating electricity arises. Th...Continue Reading »

50 pages | 893 engagements |

2. DESIGN AND CONSTRUCTION OF AN AUTOMATIC STREET LIGHT CONTROLLER

» ABSTRACT In this project work, we are mostly concern about building a simple power streetlight which is automatically operated. There are four main components required to build a solar operated streetlight. The solar array, High efficiency D.C lamp section made by transistor, resistors, and the sensor LDR, changes controller which is made up of diode, resistors, LED, capacitor, and a battery of wh...Continue Reading »

50 pages | 989 engagements |

3. DIGITAL CONTROLLED HOME AUTOMATION

» CHAPTER ONE INTRODUCTION 1.1 Background of the Study Wireless technologies are becoming more popular around the world and the consumers appreciate this wireless lifestylewhich gives them relive of the well known “cable chaos” that tends to grow under their desk. Now with the embedded Bluetooth technology, digital devices form a network in which the appliances and devices can communicate wit...Continue Reading »

30 pages | 735 engagements |

4. MODELLING OPTIMAL WATER RESOURCES ALLOCATION IN TIGA DAM, KANO STATE

» CHAPTER ONE INTRODUCTION 1.1 Background of the Study Water is the most essential element to life on Earth, sometimes a scarce resource, it is fundamental for living and also essential for agriculture in many regions of the world (as a means to achieve sustainability in production systems). Maximizing net returns with the available resources is of the utmost importance, but doing so is a complex pr...Continue Reading »

50 pages | 525 engagements |

5. DEVELOPMENT OF A PRIVACY AIDED TRUST ROUTING ALGORITHM BASED ON SOCIAL SIMILARIT...

» CHAPTER ONE INTRODUCTION 1.1 Background to the Study An opportunistic Network (OppNet) is a type of Delay Tolerant Network (DTN) and evolution of Mobile Ad hoc Network (MANET) in which a message can be transferred from source to destination even if a continuous connection from source to destination does not exist at an instance of time. Therefore, it utilizes and relies upon the opportunistic pair...Continue Reading »

50 pages | 421 engagements |

6. THE REPAIR OF A DAMAGED AIR CONDITIONER

» CHAPTER ONE INTRODUCTION 1.1 AIR CONDITIONER An air conditioner system is an assembly of various components which operate in a controlled manner to produce a specified condition of the air within a space or building. To produce complete air conditioning, a system must heat, humidify, cool, dehumidify ventilate, filter and circulate air within the conditioned space all for the comfort of the user. ...Continue Reading »

50 pages | 495 engagements |

7. DISTANCE PROXIMITY SENSOR

» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND TO THE STUDY In our society today writing a project is all about applying the theories learnt over the year to produce design and construct and operating system which will be capable of performing a known task. It is from this point of view that we decided to write, design and construct this particular project which has the titles construction and design of ...Continue Reading »

50 pages | 512 engagements |

8. DESIGN AND CONSTRUCTION OF A 0-24V VARIABLE REGULATED POWER SUPPLY

» CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY A power supply is an electronic device that supplies electric energy to an electrical load. The primary function of a power supply is to convert one form of electrical energy to another and, as a result, power supplies are sometimes referred to as electric power converters. Some power supplies are discrete, stand alone devices, whereas others ar...Continue Reading »

50 pages | 949 engagements |

9. DESIGN AND FABRICATION OF ELECTRICAL POP CORN MACHINE (A CASE STUDY OF KWARA STA...

» CHAPTER ONE INTRODUCTION 1.1 The Background of The Project The basic aim of this project is to improve the quality and standard of production of a pop corn machine and how its producing the popcorn. Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition. The design and construction of pop co...Continue Reading »

50 pages | 556 engagements |

10. PRODUCTION OF ALUMINIUM POTS

» CHAPTER ONE 1.0 INTRODUCTION Aluminium pots are made from Aluminium scap. The shape of the Aluminium pots yard according to the purpose for which they are produced. Hence there are various shapes of Aluminium pot such as cylindrical flat bottom pots spherical bowel pots e.t.c. In some cases means of production of the pots also determine their shapes. The pots being reported on are spherical bowel ...Continue Reading »

50 pages | 335 engagements |

11. THE USE OF SMARTPHONE AND ACADEMIC PERFORMANCE OF SOCIAL STUDIES STUDENTS IN JUN...

» CHAPTER ONEINTRODUCTION1.2 Background of the StudyStudents’ use of smart phones and other convergent technological devices for study and social purposes has grown significantly in the past five years. This trend is part of a more general ICT revolution impacting on the way students interact both with each other and with their studies. A smart phone is a device that can make and receive telep...Continue Reading »

50 pages | 369 engagements |

12. DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGEOVER WITH GENERATOR CONTROL AND TIMIN...

» CHAPTER ONE INTRODUCTION 1.1 Background of Study In most developing and underdeveloped parts of the world like Nigeria, the supply of electricity for industrial, commercial and domestic use is highly unstable. This gives rise to the frequent use of alternative sources of power supply to meet up with the energy demands. The introduction of these alternative sources of supply brings forth the challe...Continue Reading »

50 pages | 587 engagements |

13. DESIGN AND CONSTRUCTION OF AN AUTOMATIC SINGLE PHASE CHANGE OVER SWITCH

» Abstract Considering the epileptic power supply in Nigeria and other developing countries today, a high demand of an alternative service is required. A single phase automatic change over switch from the public mains supply to the auxiliary supplies (single phase ac generator) and vice versa has been developed. The design was realized using major components like a step down transformer (220V 12V dc...Continue Reading »

60 pages | 535 engagements |

14. DESIGN AND FABRICATION OF AN ELECTRONIC IGNITION SYSTEM

» ABSTRACT The need for higher mileage, reduced emissions and greater reliability has led to the development of the electronic ignition systems. These systems generate a much stronger spark which is needed to ignite leaner fuel mixtures. Breaker point systems needed a resister to reduce the operating voltage of the primary circuit in order to prolong the life of the points. The primary circuit of th...Continue Reading »

40 pages | 524 engagements |

15. DESIGN AND IMPLEMENTATION OF WIRELESS NETWORK IN NIGERIAN INSTITUTIONS

» ABSTRACT This project report, design and implementation of wireless local area network is written to serve as a reference book for wireless LAN in the future whenever it is desired. This report explains the survey consideration, hardware consideration, end user consideration and principle of wireless network. In addition, IEEE (Institute of Electrical and Electronics Engineers) this professional b...Continue Reading »

50 pages | 417 engagements |

16. DESIGN OF AN AUTOMATED ROAD TRANSPORT BOOKING SYSTEM

» CHAPTER ONE. .INTRODUCTION. 1.0 .INTRODUCTION. In this Chapter, the author. will be presenting sections on the background study of the Booking System which is currently used in Niger State Transport Authority (NSTA) Minna, statement of the problem, objectives of the study, significance of the study, scope of the study, limitation of the study and operational definition of terms. 1.1 .BACKGROUND......Continue Reading »

50 pages | 409 engagements |

17. DESIGN AND CONSTRUCTION OF A MICRO-CONTROLLER BASED SECURITY SYSTEM WITH INTRUDE...

» CHAPTER ONE INTRODUCTION 1.0 BACKGROUND: The microcontroller Based Security System with Intruder Position Display is a design that applies automated security system in homes, Industries, military etc. The project will feature a system that will track the presence of an intruder in restricted area and also inform the user about the position of the intruder. This Project will be based on microcontro...Continue Reading »

50 pages | 482 engagements |

18. CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA)

» CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY The Change Over Switch I a device used to switch off a power supply and subsequently switch on another power supply. Basically it is aimed at switching on a more convenient power supply to the load. Since it switches on power to the load, precautions has to be taken while choosing the type of Change Over Switch, while selecting the appropria...Continue Reading »

50 pages | 413 engagements |

19. DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A TWO STOREYED BUILDING

» CHAPTER ONE INTRODUCTION BACKGROUND OF THE STUDY Fire detection system are safety system. They monitor rooms and buildings continuously for indication of fire outbreak and give alarm directly if one occurs. Both the British Factory Acts 1961 and the officers shops and railway premises Acts 1963 stiputed minimum requirements in the case of fire that there shall be clear and audible warning througho...Continue Reading »