ELECTRICAL ENGINEERING PROJECT TOPICS AND RESEARCH MATERIALS

• 41. THE DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED LIQUID LEVEL DETECTION SY...

  » ABSTRACT The project is based on the design and construction of a microcontroller based liquid level detector. This is a system that will measure the level of liquid in a container and display the level on 3 seven segment display screen. The system will output an audio and visual alerting indicator when the tank is full and when the tank is empty. This alarm can be reset using an override switch. ...Continue Reading »

  50 pages |  359 engagements | 

• 42. A RESEARCH TOPIC ON THE DESIGN AND CONSTRUCTION OF AUTOMATIC THREE PHASE SELECTO...

  » CHAPTER ONE INTRODUCTION 1.0 BACKGROUND OF THE STUDY Initially, 3 phase voltage selector system invented manually with operating process of time wasted and inconvenience. The interest of automatic 3 phase voltage selector system is on the fact that technology advancement has made it possible to minimize cost, hard labor and time wasted, and also improves the reliability of our electrical and elect...Continue Reading »

  50 pages |  354 engagements | 

• 43. AN INSIGHT ON THE DESIGN AND CONSTRUCT A POWER LINE VANDALISM MONITORING SYSTEM ...

  » CHAPTER ONE 1.0 INTRODUCTION This project gives the insight on the design and construction of a transmission power line vandalism detector system. Vandalism means destructive action. It is a hateful and deliberate defacement/destruction of somebody else’s property or national assets like the high voltage transmission power lines, transmission towers and distribution transformers, etc. The hi...Continue Reading »

  50 pages |  347 engagements | 

• 44. DESIGN AND CONSTRUCTION OF A 3-PHASE AUTOMATIC POWER CHANGE OVER WITH GENERATOR ...

  » CHAPTER ONE INTRODUCTION The evolutionary trend in industrial electronics and automation has engulfed all parts of the world and proved more challenging to as third world like Nigeria. Regarding the milestone, it was decided to make the choice of project research on the design and implementation of an automatic 3 – phase change – over with Generator switching which will eliminate the s...Continue Reading »

  50 pages |  331 engagements | 

• 45. THE DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH

  » CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND The Change Over Switch I a device used to switch off a power supply and subsequently switch on another power supply. Basically it is aimed at switching on a more convenient power supply to the load. Since it switches on power to the load, precautions has to be taken while choosing the type of Change Over Switch, while selecting the appropriate size, the ...Continue Reading »

  50 pages |  277 engagements | 

• 46. DESIGN AND CONSTRUCTION OF RADIO FREQUENCY GSM SIGNAL JAMMER

  » Chapter One INTRODUCTION 1.1 Introduction A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent communication via a broadcasted RF signal. It is an RF and GSM frequency disrupter commonly known as wide...Continue Reading »

  50 pages |  351 engagements | 

• 47. AUTOMATIC WATER LEVEL CONTROLLER CONSTRUCTION FOR BOTH OVERHEAD AND UNDERGROUND ...

  » CHAPTER ONE INTRODUCTION 1.0 BACKGROUND The project “automatic water level control with an automatic pump control system” is design to monitor the level of liquid in the tank. The system has an automatic pumping system attached to it so as to refill the tank once the liquid gets to the lower threshold, while offering the pump once the liquid gets to the higher threshold. Sustainability...Continue Reading »

  50 pages |  409 engagements | 

• 48. DESIGN AND INSTALLATION OF 200 WATT SOLAR POWER SYSTEM – ELECTRICAL AND ELECTR...

  » CHAPTER ONE INTRODUCTION 1.1 NEED FOR THE PROJECT The general objective of the system is to provide efficiency, steadiness in the use of power appliances, by ensuring continuous availability of power supply even in the absence of mains. Interpretability of the system made it possible to eliminate all suspense from mains outage during the execution of an important and urgent assignment as may be re...Continue Reading »

  50 pages |  301 engagements | 

• 49. AN INVERTER TYPE CONSTRUCTION AND DESIGN OF AN ARC OF A WELDING MACHINE

  » CHAPTER 1 INTRODUCTION 1.1 THE BACKGROUND Welding is a way of heating pieces of metal using electricity or a flame so that they melt and stick together. It can simply be defined as the process of joining two or more pieces of metal to make the act as a single piece. This is often done by melting the work pieces and adding a filler material to form a pool of molten material that cools to become a s...Continue Reading »

  50 pages |  272 engagements | 

• 50. DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CAR...

  » ABSTRACT This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on insertion of the smart card in the card slot. The multiplexers consist of ICS which prompts for a display of the...Continue Reading »

  50 pages |  378 engagements | 

• 51. DESIGN AND CONSTRUCTION OF A DC TO AC INVERTER SYSTEM

  » ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device/item serves as a substitute for NEPA which almost monopolises the power supply to people. It is designed in such a way that it will ta...Continue Reading »

  50 pages |  387 engagements | 

• 52. DESIGN AND CONSTRUCTION OF A TRANSMITTER – ELECTRICAL AND ELECTRONICS ENGINEER...

  » Chapter One INTRODUCTION In the world today, the scientific and technological progress of any nation depends on it’s ability to measure, calculate and finally, estimate the unknown. Also, the success of an engineer or technician is judged by his ability to measure precisely and to correctly interpret the circuit performance. So as the world goes computerized, the need of electronic mostly be...Continue Reading »

  50 pages |  293 engagements | 

• 53. DESIGN AND CONSTRUCTION OF PVS CONDUIT WIRING SYSTEM OF TWO BEDROOM BUNGALOW

  » ABSTRACT This project present a practical demonstration of how to carryout the wiring of a two bedroom bungalow, using PVC conduit system. In recent times surface wiring is gradually giving way to conduit wiring where much of the cable are concealed. PVC pipes are used because of it cost friendliness, compared to metal conduit. In carryout this construction a careful attention is given to the IEF ...Continue Reading »

  50 pages |  476 engagements | 

• 54. DEVELOPMENT OF AN OPTIMAL RECONFIGURATION ALGORITHM FOR RADIAL DISTRIBUTION ELEC...

  » CHAPTER ONE INTRODUCTION 1.1 Background of the study The concept of distribution system automation has capture the attention of researchers and utility companies over the last decade. Even though, a lot of research have been undertaken and many works are still ongoing at the moment on “distribution system automation”, due to technological innovations and increasing connection of distri...Continue Reading »

  50 pages |  278 engagements | 

• 55. MODELING, ANALYSIS AND SIMULATION OF A DC GRID SINGLE ENDED PRIMARY INDUCTANCE C...

  » ABSTRACT This research studied a circuit topology of a solar based Single Ended Primary Inductance Converter (SEPIC) system and a battery furnishing a permanent magnet dc motor with current via a dc grid. The complete model equations of the entire system were derived. Harmonic balance technique was used to determine the converter steady state and ripple quantities. Analyses investigating the relat...Continue Reading »

  50 pages |  300 engagements | 

• 56. DEVELOPING BIOFUELS PRODUCTION FROM FOOD INDUSTRY WASTES IN THE RURAL AREA OF KE...

  » CHAPTER ONE 1.0 INTRODUCTION 1.1 BLACKGROUND OF THE STUDY The client, Horizon Business Ventures, produces plant oil from many kind of different seeds. This plant oil is then processed into biodiesel by transesterification process, which requires ethanol or methanol. Currently the client doesn’t refine the plant oil into biodiesel due to high price of metha nol and ethanol but rather sells th...Continue Reading »

  50 pages |  332 engagements | 

• 57. AN IMPROVED FAULT LOCATION ON POWER SYSTEM TRANSMISSION LINES USING FUZZY LOGIC ...

  » CHAPTER ONE INTRODUCTION 1.1 Background to the study The reliable operation of large power systems with small stability margin is highly dependent on systems and protection devices. The application of microprocessor based (numeric) relaying protection has improved performance over time but, this has not led to a major impact on speed, sensitivity, and selectivity of primary protective relays. Howe...Continue Reading »

  50 pages |  412 engagements | 

• 58. DESIGN AND INSTALLATION OF SATELLITE TELEVISION SYSTEM

  » CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND OF THE STUDY Entertainment and food are two things on which no one wishes to compromise. In today’s mechanical world, entertainment plays a vital role to sustain human being in this world. Before the introduction of electronic device, the major sources of entertainment for previous generations were watching street dances, drama and movie, going to ...Continue Reading »

  50 pages |  835 engagements | 

• 59. DEVELOPMENT OF A WIRELESS BASED SYSTEM FOR REMOTE PARAMETER DETECTION AND DATA L...

  » CHAPTER ONE 1 INTRODUCTION Current means of meteorological parameters data collection are rather limited and expensive altogether, this invariably results in the lack of comprehensively monitoring of remote weather parameters due to cost constraints and inconveniences even though the acquisition of comprehensive meteorological data is a prerequisite in day to day living. If there is not enough dat...Continue Reading »

  50 pages |  334 engagements | 

• 60. FEDERAL UNIVERSITY OF TECHNOLOGY OWERRI PMB 1526, IMO STATE, NIGERIA

  » CHAPTER ONE 1.0 INTRODUCTION TO SOLAR SYSTEM DESIGN A French physicist, Alexandre Edmond Becquerel, in 1839 discovered the photovoltaic effect which explains how electricity can be generated from sunlight. He claimed that shining light on an electrode submerged in a conductive solution would create an electric current. In 1905, an understanding of Edmond’s work was gained when the famous phy...Continue Reading »

  40 pages |  456 engagements |