Eduproject.com.ng logo - RESEARCH PROJECT TOPICS AND PROJECT TOPICS ON EDUCATION

MECHANICAL ENGINEERING PROJECT TOPICS AND RESEARCH MATERIALS


  • 181. THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOL...

    » ABSTRACT The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes. With the advent of semiconductor materials such as transistors electronic equipment are now becoming miniaturized such that small transmitters are now becoming handy and compact. In line with this we choose to design...Continue Reading »

    60 pages |  517 engagements | 

  • 182. CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE.

    » ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening machine was here reduced to simple term, which can be operated manually such as file and grinding machin...Continue Reading »

    56 pages |  -1 engagements | 

  • 183. CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE

    » ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening machine was here reduced to simple term, which can be operated manually such as file and grinding machin...Continue Reading »

    60 pages |  279 engagements | 

  • 184. DESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG

    » ABSTRACT The journal bearing demonstration rig is an apparatus which is used to study how pressure would vary around the section of a journal bearing at various speed of the shaft and loading conditions. The design of the journal bearing was done by the use of standard design procedures carefully stated within this work. The frame, the journal bearing, the journal shaft, the base plate and all rel...Continue Reading »

    60 pages |  308 engagements | 

  • 185. DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS.

    » CHAPTER ONE INTRODUCTION The Mitchell tilting pad apparatus is a hydrodynamic measuring instrument developed in the early 1880’s in the laboratory of Beauchamp Tower in England. Tower was employed to study the friction in railway journal bearings and come up with the best method of lubricating them. The Mitchell tilting pad apparatus is used broadly in two different experiments namely;1) Det...Continue Reading »

    60 pages |  -1 engagements | 

  • 186. FABRICATION OF A PRESSURIZED KEROSENE OVEN

    » ABSTRACT The fabrication of a pressurized kerosene oven.This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers.Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I am a...Continue Reading »

    65 pages |  275 engagements | 

  • 187. FABRICATION OF A STANDARD WHEELBARROW

    » ABSTRACT The project is about fabrication of wheel barrow, which is fabricated in Mechanical Engineering workshop in Institute of Management and Technology, Enugu.The report comprises seven chapters. Chapter one is about the introduction of the wheel. Chapter two is about the literature review, chapter three is about the material selection and analysis/ manufacturing processes. Chapter four is abo...Continue Reading »

    60 pages |  327 engagements | 

  • 188. FABRICATION OF METAL SHELF

    » ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal.The type of metal used in the fabrication is mild steel and square baluters.The undismountable bookshelf which has five partitions and four compartment under went many process namely, the drawing and the dimensioning of the bookshelf, neede...Continue Reading »

    65 pages |  302 engagements | 

  • 189. DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR

    » ABSTRACT To contribute to the development of Engineering and Technology innovations. The research work carried out in this project will help greatly in that direction. We exphasised mainly on modern methods by which a refrigerator can be operated and maintained we also included the method used in design and fabrication, assembly and arriving at knowing the safety requirement. During the process of...Continue Reading »

    65 pages |  252 engagements | 

  • 190. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXC...

    » ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3 HP electric motor, chemically reacting reagents ...Continue Reading »

    65 pages |  475 engagements | 

  • 191. DESIGN AND CONSTRUCTION OF BAKING OVEN

    » CHAPTER ONE 1.0 INTRODUCTION In recognition of the fact that the country (Nigeria has been economically and technological under developed and has been economically dependent on the first world countries for survival and in an effort to soloing these problems, the structural adjustment programme was introduced by the Babangida administration in 1986. This plays embargo on the importation of some go...Continue Reading »

    65 pages |  287 engagements | 

  • 192. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

    » ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of kerosine and gas for cooking and drying which are often not available due to scarcity of these products, h...Continue Reading »

    56 pages |  287 engagements | 

  • 193. FABRICATION OF THE A METALLIC BOOKSHELF

    » ABSTRACT Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet. Precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. The shelf is made up of 3 partition. In fabricating the metallic...Continue Reading »

    65 pages |  262 engagements | 

  • 194. REPAIR AND REHABILITATION OF A FAULTY AIR- CONDITIONER.

    » ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable. The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to every individual in order to avoid huge expenditure in the repairs of the system.This report gives insight in...Continue Reading »

    56 pages |  -1 engagements | 

  • 195. REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM

    » CHAPTER ONE INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler.Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C).Generally, however, for a space or substance to be cooler, it must loss that heat t...Continue Reading »

    60 pages |  282 engagements | 

  • 196. CONSTITUTION AND FABRICATION OF BENCH SHEARING MACHINE

    » CHAPTER ONE INTRODUCTION Later in the years Nigeria as a country failed to react to the rapid advancement in technology until 1986, she realized that in both economy and technology she was under developed, she was dependent on the developed countries for survival, because many thing are being important from those countries. Attempt made to solve these problem include, introduction of the structura...Continue Reading »

    60 pages |  263 engagements | 

  • 197. REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER

    » ABSTRACT Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer.Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful repair was adopted.In other words during the repair and rehabilitation o...Continue Reading »

    56 pages |  241 engagements | 

  • 198. REPAIR OF A FAULTY REFRIGERATOR

    » ABSTRACT This report covers all activities candied out to rehabilitate a faulty refrigerator.First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults.After which we bought the necessary standard items that caused the fault. We then started work on it by replacing necessary instruments. We finally listed it and found out that the objective was fully ac...Continue Reading »

    60 pages |  259 engagements | 

  • 199. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT

    » ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations and replacement of some pants.The project was subsequently assembly and ...Continue Reading »

    65 pages |  272 engagements | 

  • 200. CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

    » ABSTRACT This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the compressor) and isothermal compressor ( at the condenser...Continue Reading »

    65 pages |  248 engagements | 

. ABSTRACT, Proposals, Literature Reviews, Aims & Objectives, Methodology, Surveys & Implementations