Eduproject.com.ng logo - RESEARCH PROJECT TOPICS AND PROJECT TOPICS ON EDUCATION

MECHANICAL ENGINEERING PROJECT TOPICS AND RESEARCH MATERIALS


  • 101. CONSTRUCTION OF GRAIN GRINDING MACHINE.

    » ABSTRACT The aim of the project is to construct a domestic grain grinding machine to be powered by electric motor through pulley and belt transmission. The project is to perform mostly blending and grinding on grains e.g beans, maize, melon, millet and such other food crops. In construction of the project, there are various factors that is being put into consideration. i. The size specification ii...Continue Reading »

    76 pages |  -1 engagements | 

  • 102. CONSTRUCTION OF PROPELLER AGITATOR...

    » ABSTRACT Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties. After the procurement, the following constructional operations were carried out which included marking out, center punching folding, welding, filling operation,...Continue Reading »

    76 pages |  -1 engagements | 

  • 103. CONSTRUCTION OF TWO FACE GAS BURNER.

    » ABSTRACT This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage. Herein are brief information and literature on gas burner. The properties of the constructional feature and their preference in construction a...Continue Reading »

    76 pages |  -1 engagements | 

  • 104. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE.

    » ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle which is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its initial position, which makes the machines tedious and stre...Continue Reading »

    76 pages |  -1 engagements | 

  • 105. DESIGN AND CONSTRUCTION OF A SPIN DRYER.

    » ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population. This machine was designed after due consideration o...Continue Reading »

    76 pages |  -1 engagements | 

  • 106. DESIGN AND CONSTRUCTION OF BAKING OVEN

    » ABSTRACT This project is aimed at producing an oven a purposeful baking oven with temperature regulator, which is economical and very convenient to use. The equipment was designed taking into consideration the case of its production, maintenance and services. The production design which includes planning drawing and specifications of materials was directly followed by the actual fabrication / main...Continue Reading »

    76 pages |  -1 engagements | 

  • 107. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT

    » ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations and replacement of some pants. The project was subsequently assembly and...Continue Reading »

    66 pages |  -1 engagements | 

  • 108. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE.

    » ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper. Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied thickness. The result of this investigations were utilized in the design and constructio...Continue Reading »

    66 pages |  -1 engagements | 

  • 109. THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE

    » ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light. In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important. The major component of the candle molding machine are: the castle...Continue Reading »

    66 pages |  -1 engagements | 

  • 110. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE.

    » ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism. Electrical section include the transformer, Regular...Continue Reading »

    66 pages |  -1 engagements | 

  • 111. CONSTRUCTION OF PROPELLER AGITATOR.

    » ABSTRACT Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties. After the procurement, the following constructional operations were carried out which included marking out, center punching folding, welding, filling operation,...Continue Reading »

    66 pages |  29 engagements | 

  • 112. ORIGIN AND DEVELOPMENT OF CO-OPERATIVE SOCIETIES IN NIGERIA (A CASE STUDY OF IMT...

    » CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND OF STUDY There is a discernible pattern of co operative development in African and Asian countries, which were former colonies of Europe, Nigeria is no exception. During the colonial days the seed of co operation was sown but it could only grow slowly. At this points, co operative were restricted to serve only the purpose of the paymaster (the white man)...Continue Reading »

    66 pages |  37 engagements | 

  • 113. AN APPRAISAL OF THE ACTIVITIES AND MANAGEMENT METHODS OF ANAMMCO WORKERS MULTI-P...

    » CHAPTER ONE 1.0 INTRODUCTION 1.1 GENERAL INTRODUCTION The population of this study is limited to the worker’s of ANAMMCO who come together of their own free will to form the ANAMMCO worker’s multipurpose co operative society Ltd. This is made up of people who voluntarily associated together as human beings on the basis of equality, for their social economic interest. Anammco worker&rsq...Continue Reading »

    66 pages |  274 engagements | 

  • 114. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE.

    » ABSTRACT This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since vibration will be reduced to the bearest minimum. Every wheel and its shaft have to be in a state of balanced, two mating shaft ...Continue Reading »

    66 pages |  -1 engagements | 

  • 115. RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERI...

    » ABSTRACT In the mechanical Engineering department of institute of management and technology there and many machines but not all in are good shape or form. This may be due to inadequate maintenance, which is evident in the breakdown of air conditioner. In the case of machine maintenance, the quality and effusiveness of material were well noted. Also not left behind was the cost of maintenance which...Continue Reading »

    66 pages |  269 engagements | 

  • 116. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ...

    » ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review. Quality and effectiveness of machine maintenance were observed. A minimized cost of maintenance and high Technology of repair were also adopted...Continue Reading »

    66 pages |  266 engagements | 

  • 117. REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER.

    » ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable. The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to every individual in order to avoid huge expenditure in the repairs of the system. This report gives insight i...Continue Reading »

    66 pages |  -1 engagements | 

  • 118. REPAIR OF AN AIRCONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT

    » CHAPTER ONE 1.1 AIR CONDITIONER Indoor climate, once adjusted to human need only by opening of heating in winter and by opening windows or using fans. In summer, is now capable of being varied to meet almost any comfort of industrial demand, anywhere on earth with precise automatic control. With the introduction of air conditioner, the indoor air can be controlled through the blowing and sucking s...Continue Reading »

    66 pages |  243 engagements | 

  • 119. THE DESIGN AND FABRICATION OF MECHANICAL.

    » LAWN MOWER CHAPTER ONE INTRODUCTION In this pass, cutting of grasses in the school, track or filed, Industries hotel, public centers, Agriculture lands etc. was done by machete or cutlass. This method of manual cutting not only was laborious but also time consuming as it is human effort that is entirely needed both for cutting and motion. There was also inaccuracy in cutting level of the each inac...Continue Reading »

    66 pages |  -1 engagements | 

  • 120. DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS

    » CHAPTER ONEINTRODUCTION The Mitchell tilting pad apparatus is a hydrodynamic measuring instrument developed in the early 1880’s in the laboratory of Beauchamp Tower in England. Tower was employed to study the friction in railway journal bearings and come up with the best method of lubricating them. The Mitchell tilting pad apparatus is used broadly in two different experiments namely;1) Dete...Continue Reading »

    66 pages |  -1 engagements | 

. ABSTRACT, Proposals, Literature Reviews, Aims & Objectives, Methodology, Surveys & Implementations