ELECTRICAL ENGINEERING PROJECT TOPICS AND RESEARCH MATERIALS

• 401. DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGE-OVER SWITCH WITH GENERATOR CUT OF...

  » CHAPTER ONE INTRODUCTION 1.1 Background of The project The increase rate of epileptic power supply especially in tropical African countries where Nigeria forms a part has become a major concern. The power supply instability in developing countries creates a need to device means for alternative power sources. The automation of electrical power generation or alternative sources of power to back up t...Continue Reading »

  57 pages |  -1 engagements | 

• 402. DESIGN AND IMPLEMENTATION OF REMOTE CONTROL DOOR SYSTEM.

  » ABSTRACT The paper presents a simple design and implementation of a remote control door. It enables the user to control the door using remotefrom approximately10 meters away. The remote transmits a tone using an infrared light emitting diode. This tone is decoded by a receiver, since the receiver only switcheswhen the tone is received. The system was broken down into simplerfunctional blocks namel...Continue Reading »

  59 pages |  -1 engagements | 

• 403. DESIGN AND CONSTRUCTION OF A CENTRAL WIRELESS SWITCH THAT CONTROLS THE ENTIRE AP...

  » ABSTRACT The purpose of this project is to design and construction of a central wireless switch for electrical and electronic appliances. A central wireless switch for electrical and electronic appliance is a GSM based online power control switch system that controls the entire appliance in the EEE general office using GSM network. It will act as an embedded system which would monitor and control ...Continue Reading »

  59 pages |  455 engagements | 

• 404. DESIGN AND CONSTRUCT A PORTABLE MICROCONTROLLER BASED INTELLIGENT QUEUE MANAGEME...

  » CHAPTER ONE INTRODUCTION 1.1 Background of Study This chapter gives an overview of thisproject titled a queue management system (microcontroller based intelligent queue management system). This report started with the background of our study to give the readers an idea of what this project is all about before going into its technical details. The chapter also contain the problem statement, aims an...Continue Reading »

  76 pages |  -1 engagements | 

• 405. DESIGN AND CONSTRUCTION OF AN ALTERNATIVE HOUSEHOLD POWER GENERATING SYSTEM.

  » ABSTRACT This work presents the design and construction of an alternative household power generating system. The product is about to acquire knowledge on, is all about on how to convert your fuel generator to a fuel less generator. Many people thought that it can never be in existence of having a product that can never deal with diesel or engine oil, but in this hand out the pictures below shows t...Continue Reading »

  76 pages |  -1 engagements | 

• 406. AC POWER SUPPLY USING SOLAR SYSTEM.

  » CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE PROJECT The perspective of this non conventional method of power generation known as solar power must become the primary source of commercial power for everyone in the world to achieve the same high standard of living. A power system is needed that is independent of Earth's biosphere and provides abundant energy at low cost. To do this mankind must co...Continue Reading »

  59 pages |  -1 engagements | 

• 407. APPLICATIONS OF STEPPER MOTORS.

  » CHAPTER ONE INTRODUCTION 1.1 BACKGROUND STUDY OF THE PROJECT A stepper motor is a “digital” version of the electric motor. The rotor moves in discrete steps as commanded, rather than rotating continuously like a conventional motor. When stopped but energized, a stepper (short for stepper motor) holds its load steady with a holding torque. Wide spread acceptance of the stepper motor wit...Continue Reading »

  76 pages |  -1 engagements | 

• 408. DESIGN AND CONSTRUCTION OF AUTOMATIC HAND DRYER WITH TEMPERATURE DISPLAY

  » ABSTRACT This project work deals on the design and implementation of an automatic hand dryer with display capable of drying up a wet hand inserted under its vent and goes off automatically as soon as the ands are removed. The system also incorporates a decimal counting unit that displays the temperature of the blown out air in 0C. This system is configured using an optp coupler realized with cadmi...Continue Reading »

  59 pages |  689 engagements | 

• 409. DESIGN AND CONSTRUCTION OF A 3-PHASEA AUTOMATIC POWER CHANGE OVER WITH GENERATOR...

  » CHAPTER ONE INTRODUCTION The evolutionary trend in industrial electronics and automation has engulfed all parts of the world and proved more challenging to as third world like Nigeria. Regarding the milestone, it was decided to make the choice of project research on the design and implementation of an automatic 3 phase change – over with Generator switching which will eliminate the stress an...Continue Reading »

  86 pages |  -1 engagements | 

• 410. DESIGN AND IMPLEMENTATION OF AUTOMATIC 3 – PHASE CHANGE – OVER WITH GEN SET ...

  » CHAPTER ONE INTRODUCTION The evolutionary trend in industrial electronics and automation has engulfed all parts of the world and proved more challenging to as third world like Nigeria. Regarding the milestone, it was decided to make the choice of project research on the design and implementation of an automatic 3 phase change – over with Generator switching which will eliminate the stress an...Continue Reading »

  66 pages |  -1 engagements | 

• 411. DEVELOP MATHEMATICAL MODELS FOR POWER LOSSES ALONG TRANSMISSION LINES AND TO MIN...

  » ABSTRACT Availability of electric power has been the most powerful vehicle for facilitating economic, industrial and social developments of any nation. Electric power is transmitted by means of transmission lines which deliver bulk power from generating stations to load centres and consumers. For electric power to get to the final consumers in proper form and quality, losses along the lines must b...Continue Reading »

  66 pages |  490 engagements | 

• 412. DESIGNING AND CONSTRUCTING OF AN AUTOMATED LIGHT SYSTEM USING PHOTO-SENSITIVE SW...

  » CHAPTER ONE 1.0. INTRODUCTION 1.1. GENERAL DESCRIPTION OF THE PROJECT Industrial electronics has turned the whole world into a global village. One of the most indispensable aspects of these phenomena is automation, which forms the nucleus of the present day electronics technology. Considering the milestone, it was desired to make the choice of the project research on the design and implementation ...Continue Reading »

  65 pages |  -1 engagements | 

• 413. DESIGN AND IMPLEMENTATION OF INTRUDER DETECTOR ALARM SYSTEM WITH LOCATION.

  » CHAPTER ONE INTRODUCTION 1.1. Background of the Study The industrial Electronics has changed the whole field of Engineering and technology is occurring so rapidly, even in developing countries. It is so because newer technologies overcome older ones. After the industrial revolution the world shifted towards the information age with the development of computers during the 1950's. As such, mechantro...Continue Reading »

  65 pages |  -1 engagements | 

• 414. DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER.

  » INTRODUCTION An audio AMP is basically a system which is used as a means of increasing the level of sound or audio signals for maximum use. A public address system consists basically of microphone, Amplifier and speaker(s) to facilitate the communication to intelligible speech to groups of people or an audience. The main purpose of providing sound reinforcement indoors with sufficient high –...Continue Reading »

  54 pages |  -1 engagements | 

• 415. CONSTRUCTION OF CAR TOUCH INTRUDER ALARM.

  » ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum audible sound. However, pin 2 of the first NE555 was used as sensor part .When pin 2 has con...Continue Reading »

  54 pages |  -1 engagements | 

• 416. MICROCONTROLLER BASED SMOKE DETECTOR

  » ABSTRACT The microcontroller smoke detector is a system designed to provide security level in areas that requires high accuracy of precaution against fire outbreak, in an industry, commercial buildings and even domestic homes. This project uses 89s52 microproecessor as it major component. This microprocessor is the central processing unit of the project, it is configured into the design and functi...Continue Reading »

  54 pages |  610 engagements | 

• 417. DESIGN AND CONSTRUCTION OF SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH FROM GENERA...

  » ABSTRACT The most industrial and commercial process are depedent on electrical power in the event of power interpretation, the change over of power supplied by a public utility to a generator is usually performed manually, often resulting in wastage time. Moreover, mechanic and some house hold appliances damages occurs because of human errors. These can cause significant losses. This paper present...Continue Reading »

  76 pages |  -1 engagements | 

• 418. CONSTRUCTION OF 200W UNINTERRUPTIBLE POWER SUPPLY.

  » CHAPTER ONE 1.0 INTRODUCTION The idea behind a UPS (Uninterruptible Power Supply) is pretty obvious from the name, in addition to filtering, enhancing or modifying the unity power, special circuit and batteries are used to prevent electrical machines from losing power during a disruption (blackout or voltage sag brownout). The units are all called different names depending on the next design, but ...Continue Reading »

  76 pages |  -1 engagements | 

• 419. CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH.

  » CHAPTER ONE 1.0 INTRODUCTION As the zeal for change over on public power supply and stand by generator increases, Engineers have researched deep into the different ways and methods of achieving power change over both manual and automatic types. It may not be considered a serious issue in some places where supply is up to 90% constant or where intermittent outage causes no great damage. However, pl...Continue Reading »

  76 pages |  -1 engagements | 

• 420. DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER.

  » Chapter one 1.0 INTRODUCTION as the quest for change over on public power supply and stand by generation increase. Engineering have researches deep into the different methods of achieving to both manual and automatic types. It may not be taken seriously in some places where power supply is up to 90 constant or where intermittent outage causes no great damage. However, place where they have busines...Continue Reading »

  76 pages |  -1 engagements |