ABSTRACT

The purpose of the study is to design a system that will be in charge of capacity utilization measurement system especially in production companies which the case study is Anammco Nig. Ltd. Enugu) and to develop a computer packages whereby the technique observed from the manual method can be improved on.  It is a known feet that the manual method of capacity utilization measurement in production has been associated with lots of inaccuracy in capacity utilization and this has lead to early break down of parts when in service.  The  software when developed will facility and enhanced the  mode and methods of capacity utilization in spare parts production of Anammco.

ORGANIZATION OF WORK

Chapter one with the introduction and the foundation laying of the project work.

Chapter two deals with the review of literature relevant to the  actualization of this project work.

Chapter three deals with the analysis of the existing system in it’s entirely as well as its short  comings.

Chapter four deals with the design of the new  system, with its specifications and requirement.

Chapter five deals with the implementation of the new system.

Chapter six deals with the  implementation of the new system.

Chapter seven deals with the recommendations and conclusion.

1. 1. This material content is developed to serve as a GUIDE for students to conduct academic research work
2. 2. As a source for additional understanding of the subject.
3. 3. As a source for ideas for your own research work (if properly referenced).
4. 4. For PROPER paraphrasing (see your university definition of plagiarism and acceptable paraphrase)
5. 5. Direct citing (if referenced properly)
Thank you so much for your respect to the authors copyright.