Eduproject.com.ng logo - RESEARCH PROJECT TOPICS AND PROJECT TOPICS ON EDUCATION

ELECTRICAL ENGINEERING PROJECT TOPICS AND RESEARCH MATERIALS


  • 1. CONSTRUCTION OF MOTION SENSOR AUTO LIGHT SYSTEM

    » ABSTRACT The need for having protection has always been there. But in the recent times, considering the fact of safety it is more strongly felt to have a emergency system, it was then that the design and construction of motion detector with light system based upon electronic circuit were developed to illuminate dark sectors of engineering. This device serves as a security in your environment....Continue Reading »

    55 pages |  1 engagements | 

  • 2. Construction Of Digital Ac Power Controller

    » ABSTRACT The desire for power to be controlled by means of phase angle variation of the conduction period brought about a digital ac power controller. Controlling the phase angle can be made simple and easy if we set different firing times corresponding to different firing angles. The circuit can be used as power controller in lighting equipment, hot air equipment, universal single phase ac motor,...Continue Reading »

    50 pages |  4 engagements | 

  • 3. CONSTRUCTION OF EQUIPMENT FOR DEODORIZING KEROSENE

    » ABSTRACT The motive of this project is to construct equipment for deodorizing kerosene, hence the smell of kerosene is totally eradicated. The equipment was constructed with flat sheet plates of a desired standard, the dimension and the truncated parts were coupled and welded in order to fasten the parts together. The material was selected to avoid the effect of rust due to the contact of the sepa...Continue Reading »

    51 pages |  73 engagements | 

  • 4. PRODUCTION OF EMULSION POINT WITH THE AVAILABLE MATERIAL

    » ABSTRACT This project is on the production of paint from the available materials. The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc. the next step is the proper production procedure. The same product patterns was employed while the production was valued with a view to obtain a high quality paint. From the result obtained, it ...Continue Reading »

    51 pages |  78 engagements | 

  • 5. CONSTRUCTION OF A SIMPLE PAINT MIXER

    » ABSTRACT A paint mixer is defined as a pattern constructed for the production (mixing) of paint manually. The method of fabrication of the paint mixer involved a preliminary computation of the dimensions of the standard mixer in relation to the dimension of the reacting vessel in which they will be used in marking out, cutting out to sizes, rolling, folding, welding, body filling and painting. The...Continue Reading »

    51 pages |  71 engagements | 

  • 6. EVALUATION OF THE EFFECTS OF FLOODING ON FOUR VARIETIES OF RICE (A CASE STUDY OF...

    » ABSTRACT Flooding has been described as one of the most important environmental factors determining the distribution of salt maize plants. We studied the impact of five water levels on the germination and establishment of the invasive cord grass spartina denifora. Plant house experiment was carried out to determine the effects of time and depth of flooding o the survival and growth of rice. Data s...Continue Reading »

    51 pages |  79 engagements | 

  • 7. PRODUCTION OF LOQUID AND VAPOURIZED PERFUME

    » ABSTRACT This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The local raw material were subjected to various processing conditions in order to obtain purified perfume. The methods generally used in this work include expression steam distillation and solvent extraction. During the production of vapourized and liquid perfu...Continue Reading »

    51 pages |  67 engagements | 

  • 8. CONSTRUCTION OF ORSAT GAS ANALYZER

    » ABSTRACT The Orsat Gas Analyzer was constructed at the project development institute (PRODA), Enugu. The operation involved the laboratory glass blowing which entails the heating of a glass tube. The heating •continues until the glass tube reaches its plastic state. The shape of the tube is changed or the required shape blown by pulling, bending by hand, cutting with a knife and also blown wi...Continue Reading »

    51 pages |  72 engagements | 

  • 9. CONSTRUCTION OF AN INTRUDER ALARM SYSTEM

    » ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of today can produce (construct) things that will help t...Continue Reading »

    51 pages |  57 engagements | 

  • 10. THE DESIGN AND IMPLEMENTATION OF ELECTRONICS SEQUENTIAL SIGN PATTER DISPLAY

    » ABSTRACT This design implementation of this electronic sequential sign post display employs the use of some specialized components. This section of the project introduces the reader to the different section of the project and the components that makes them up. Emphasis are laid on describing the behaviour and operational system of the components as related to the project modeling, analysis, design...Continue Reading »

    51 pages |  50 engagements | 

  • 11. DIGITIZATION OF TELEVISION BROADCASTING IN NIGERIA REVIEW

    » ABSTRACT Information and Communication Technology (ICT) has opened up new and robust ways of sending and receiving information at global level. Any type of information including voice and video is sent to the diverse publics, who equally have variety of choices. Thus, the development of any nation is tied to efficient information dissemination. In Nigeria, television broadcasting started in 1959 w...Continue Reading »

    51 pages |  76 engagements | 

  • 12. THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER A PROJECT PRESENTED TO THE DEP...

    » ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage stabilizer, which could be connected, to the main and then th...Continue Reading »

    51 pages |  66 engagements | 

  • 13. ALTERNATIVE RAW MATERIAL SOURES FOR CEMENT PRODUCTION

    » ABSTRACT It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process wet semi wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement. It therefore becomes imperative to bring down the cost of cement by investigating into alternat...Continue Reading »

    51 pages |  62 engagements | 

  • 14. WASTES AND SEWAGE AS A SOURCE OF ELECTRICITY GENERATION

    » ABSTRACT Waste and residuals are undeniably part of the human society. The accumulation of these materials and the “throw away” philosophy results in many environmental and health issues and safety hazard problems prevent sustainable development in terms of resource recovery and recycling of waste materials. The carbon sources in the waste can be converted to energy (electricity) using...Continue Reading »

    51 pages |  66 engagements | 

  • 15. FABRICATION OF A METALLIC BOOKSHELF

    » ABSTRACT Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet; precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. The shelf is made up of 3 partitions. In fabricating the metalli...Continue Reading »

    51 pages |  63 engagements | 

  • 16. MACHINE COMPONENT DESIGN

    » DEFINITION OF A KEY A key is a piece of steel in inserted between the shaft and a hub of the pulley or the gear, mainly to that power. Key are always inserted parallet to the shaft axis. They are need as temporally fastening and are subjected to considerable cursing and shearing stresses. A key way in a slut or recess in the shaft and hub of a pulley to accommodate a key. KEYS A key is a machine m...Continue Reading »

    51 pages |  64 engagements | 

  • 17. ENGINEERING DRAWING IN TERMS OF COMMUNICATION

    » INTRODUCTION Communication means extending information form one person to another in a way in which it can be understood. Information and ideas in technical and scientific fields can very often be more easily communicated through sketching or instrument drawing and blueprint reading. Drawing involves describing the shape and size of an object....Continue Reading »

    51 pages |  58 engagements | 

  • 18. PUBLIC TRANSPORTATION: THE ROLE OF GOVERNMENT AND PRIVATE ENTERPRISE

    » ABSTRACT Transportation is a requirement for every nation, regardless of its industrial capacity, population size or technological development. The Nigerian transport systems, right from inception, were poorly designed and are unable to scale up to meet greater demand, a design flaw which causes traffic congestion on roads, overstressed railways, faltering airfields, and mass transport blind spots...Continue Reading »

    51 pages |  65 engagements | 

  • 19. DESIGN AND IMPLEMENTATION OF COMPUTERIZED STOCK STOCK MARKETING REPORT REPORT (A...

    » ABSTRACT Most Stock Marketing Report, production, and manufacturing firms have the basic problem of information flow between the various departments within the organization. This research is intended to highlight the role of a computerized Stock Marketing Report information system in NSEC Compare to the manual system of Stock Marketing Report. To identify the various problems involve in the existi...Continue Reading »

    51 pages |  73 engagements | 

  • 20. DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/...

    » ABSTRACT This project work up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to the head. It is experimentally done using flat meta...Continue Reading »

    51 pages |  57 engagements | 

. ABSTRACT, Proposals, Literature Reviews, Aims & Objectives, Methodology, Surveys & Implementations